Automatic Aluminum Plastic Vacuum Forming Machine Pouch Cell Assembly Equipment

Product Description
Suitable for the punching and forming of aluminum-plastic film for pouch cell lithium batteries

The equipment adopts a structural mode of automatic feeding, step-by-step feeding, stretching forming, and fixed length cutting through the material coil, continuously forming and cutting the coil into individual pieces to achieve automated production. The principle of gas-liquid pressurization is used to achieve the pressure required for stamping forming, converting the small air source pressure into a larger hydraulic output, thereby driving the mold to punch the aluminum-plastic mold shell.
Main features:
*The feeding length can be preset, the cutting blade position can be adjusted according to different products, and the electronic ruler has a digital display.
*The feeding part adopts an inflatable shaft to fix the material roll, and a micro motor drives the feeding.
*The unwinding position is equipped with a dust brushing device for effective cleaning.
*The material is pulled by a servo robot arm, and the robot arm guide rail is guided by a high-strength linear guide rail.
*Adopting a tension control and feeding control method that combines gravity and photoelectric switches.
*Using programmable logic controller (PLC) to achieve automation control and touch screen human-machine dialogue.
*This machine has complete safety protection performance, dual button operation protection, reliable control, and easy operation

*Battery specification: ≤ 200 * 200 * 8mm;
*Aluminum plastic film thickness: 0.11-0.2mm;
*Roll diameter: ≤ 400mm;
*Capacity: 500EA/H;
*Power supply: AC220V;
*Compressed air source: 0.6-0.7Mpa;
*Dimensions: L2800 * W800 * H1850mm;
*Weight: 800Kg